




Dorado Air + TSR Trail Side Relief
Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.
TSR Bleed Buttons allow excess pressure built up in the outer legs of the fork to be equalized with a simple press of the button located on the top cap.
TPC+ Twin-Piston Cartridge
TPC+ is a velocity and position dependent damping circuit that maintains light damping thru small bumps when the fork is high in the travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out.


Carbon Fiber + Inverted Design
After its debut 11 years ago, the Dorado Pro is once again dressed in carbon. In addition to looking amazing, the upper carbon tubes allow a 238g weight savings compared to alloy along with increased stiffness.
Inverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals.
Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control to the rider over rough trail sections.



You may also like
Recently viewed
Dorado Air + TSR Trail Side Relief
Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.
TSR Bleed Buttons allow excess pressure built up in the outer legs of the fork to be equalized with a simple press of the button located on the top cap.
TPC+ Twin-Piston Cartridge
TPC+ is a velocity and position dependent damping circuit that maintains light damping thru small bumps when the fork is high in the travel. As the fork compresses deeper in the trave the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out.
Carbon Fiber + Inverted Design
After its debut 11 years ago, the Dorado Pro is once again dressed in carbon. In addition to looking amazing, the upper carbon tubes allow a 238g weight savings compared to alloy along with increased stiffness.
Inverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control to the rider over rough trail sections.